Polycom RealPresence RMX 1500 Administrator's Manual page 808

To add a flag:
1 In the System Flags dialog, click New Flag.
The New Flag dialog box is displayed.
2 In the New Flag field enter the flag name.
3 In the Value field enter the flag value.
The flags in the Manually Added, Modified, Deleted System Flags table can be manually added
to the MCMS_PARAMETERS_USERS
4 Click OK to close the New Flag dialog.
The new flag is added to the flags list.
5 Click OK to close the System Flags dialog.
Unless indicated otherwise, reset the MCU is required for flag changes (including deletion) to take
effect. For more information see
:
Manually Added, Modified, Deleted System Flags
Flag
ACCEPT_VOIP_DTMF_TYPE
Polycom®, Inc.
tab.
Resetting the Collaboration
Description
Defines the type of DTMF tones (inband) or digits (outband) that the
Collaboration Server will accept in VOIP calls.
Range:
• 0 - Auto (default):
Inband or outband DTMF tones/digits are accepted depending on the
endpoint's current setting. If the endpoint switches from inband to
outband, and vice versa, the value of the
SET_DTMF_SOURCE_DIFF_IN_SEC flag determines the time interval
after which both inband and outband tones/digits will be accepted.
• 1 - Outband (H.245) only
• 2 - Inband only
System Configuration Flags
Server.
777