Polycom RealPresence RMX 1500 Administrator's Manual page 828

Manually Added, Modified, Deleted System Flags
Flag
RTCP_FLOW_CONTROL_TMMBR
_INTERVAL
RTCP_PLI_ENABLE
RTCP_QOS_IS_EQUAL_TO_RTP
RTV_MAX_BIT_RATE_FOR_FORC
E_CIF_PARTICIPANT
SELF_IND_LOCATION
SEND_SIP_BUSY_UPON_RESOU
RCE_THRESHOLD
Polycom®, Inc.
Description
Modifies the interval (in seconds) of the TMMBR (Temporary Maximum
Media Stream Bit Rate) parameter for SIP RTCP flow control.
Range: 5 - 999 (seconds)
Default: 180
When set to YES, the (Picture Loss Indication (PLI) is sent as INFO (and
not RTCP).
Default = YES
Range: YES/NO
Default: YES
Enables the removal of empty video cells from a Video Layout.
Change the location of the display of the Network Quality Indicator of the
participant's own endpoint.
Default: BOTTOM_RIGHT
Range:
• TOP_ LEFT
• TOP
• TOP_RIGHT
• BOTTOM_ LEFT
• BOTTOM
• BOTTOM_RIGHT
NOTE: This flag's function has been replaced by the Network Quality check
box in the Layout Indications tab of the New Profile / Profile Properties
dialog.
When set to YES, it enables the Collaboration Server to send a busy
notification to a SIP audio endpoint or a SIP device when dialing in to the
Collaboration Server whose audio resource usage exceeded the Port
Usage threshold.
When set to NO, the system does limit the SIP audio endpoint connections
to a certain capacity and will not send a busy notification when the resource
capacity threshold is exceeded.
Default: NO
System Configuration Flags
797