Polycom RealPresence RMX 1500 Administrator's Manual page 812

Manually Added, Modified, Deleted System Flags
Flag
CPU_BONDING_MODE
DETECT_H323_EP_DISCONNECT
_TIMER
DETECT_SIP_EP_DISCONNECT
_TIMER
DELAY_BETWEEN_H320_DIAL_O
UT_PARTY
DISABLE_CELLS_NETWORK_IND
DISABLE_DUMMY_REGISTRATIO
N
Polycom®, Inc.
Description
Sets the Bonding Mode of the Signalling and Management network
interface controllers.
Mode=6, balance-alb,
(Adaptive Load Balancing) includes balance-tlb, (Transmit Load Balancing)
and balance-rlb (Receive Load Balancing) for IPV4 traffic. No special
switch support is required.
Receive Load Balancing is achieved by ARP negotiation.
Outbound ARP Replies are intercepted and their source hardware address
is overwritten with the unique hardware address of one of the slaves in the
bond. In this way different peers will use different hardware addresses for
the server.
Note: balance-alb is the only supported value. All other possible values are
for troubleshooting purposes only.
Default: balance-alb
Possible values:
• balance-alb
• balance-rr
• active-backup
• balance-xor
• broadcast
• 802.3ad
• balance-tlb
On detecting a H.323 endpoint disconnection, a new system flag,
DETECT_H323_EP_DISCONNECT_TIMER allows you to specify the
amount of time the MCU waits before disconnecting the endpoint.
On detecting a SIP endpoint disconnection, a new system flag,
DETECT_SIP_EP_DISCONNECT_TIMER allows you to specify the
amount of time the MCU waits before disconnecting the endpoint
The delay in milliseconds that the MCU waits when connecting dial out
ISDN and PSTN participants.
Default: 1000
Disable the display of Network Quality Indicators displayed in the cells of
the conference Video Layout.
Default: YES
Range: YES / NO
Enables or disables SIP dummy registration on the domain.
Possible Values:
NO (Default) - Disables SIP dummy registration.
YES - Enables SIP dummy registration.
Note: For homologation and certification testing, the flag must be set to
YES.
System Configuration Flags
781