Polycom RealPresence RMX 1500 Administrator's Manual page 815

Manually Added, Modified, Deleted System Flags
Flag
ENABLE_MS_FEC
ENABLE_NO_VIDEO_RESOURCE
S_AUDIO_ONLY_MESSAGE
ENABLE_RECORDING_
OPERATION_VIA_SIPINFO
ENABLE_RTP_TRAFFIC_SHAPIN
G
ENABLE_SELECTIVE_MIXING
ENABLE_SIP_PEOPLE_PLUS_CO
NTENT
Polycom®, Inc.
Description
Enables the Microsoft FEC (Forward Error Correction) support for RTV.
Range: Auto/No
Default: Auto
When set to Auto, FEC support is enabled. FEC uses the DV00 option
(DV=00 - one FEC per frame using XOR). When set to No, FEC support is
disabled.
Enables playing a voice message that Informs the participant of the lack of
Video Resources in the RealPresence Collaboration Server and that he/she
is being connected as Audio Only.
Default: YES
Allows recording control operations to be performed using either DTMF
tones or a SIP INFO request.
When set to NO: The Collaboration Server will send Recording Control
Operation commands to the Capture Server using DTMF as in all previous
version.
When set to YES: The Collaboration Server will send Recording Control
Operation commands to the Capture Server using a SIP INFO request.
Default: NO
Indicates whether traffic shaping, which is responsible for flattening packet
bursts within 100 msec time intervals, is enabled. When set to YES, traffic
shaping is applied to all ports, resulting in some port capacity reduction in
MCUs with MPMx/MPMRx cards (see
Shaping). When set to NO, traffic shaping is disabled.
Range: YES, NO
Default: NO
Enables (default) or disables the Automatic muting of noisy AVC endpoints.
For more details, see Automatic Muting of Noisy
When set to YES, the automatic muting of noisy endpoints can be enabled
or disabled at the conference level in the Conference Profile - Audio
Settings dialog box.
When set to NO, the automatic muting of noisy endpoints is disabled at the
conference level and cannot be enabled in the Conference Profile - Audio
Settings dialog box.
Default: YES
Note: MCU reset is not required when changing the flag value, though
change will apply only for conferences created from that point onward.
If security is of higher priority than SIP Content sharing, SIP
People+Content can be disabled by setting this System Flag to NO. (The
content management control (BFCP) utilizes an unsecured channel
(60002/TCP) even when SIP TLS is enabled.)
Default: YES
System Configuration Flags
Capacity Reduction During Traffic
Endpoints.
784