Connect To The Collaboration Server Using A Modem (1500/2000/4000) - Polycom RealPresence RMX 1500 Administrator's Manual

Connect to the Collaboration Server using a Modem
(1500/2000/4000)
Remote access to the Collaboration Server's Alternate Management Network is supported via an external
PSTN <=> IP modem.
To connect via modem to the Alternate Management Network perform the following procedures:
1 Procedure 1: Install the RMX Manager – The web client enables direct access to the Collaboration
Server for support purposes.
2 Procedure 2: Configure the modem – By assigning it an IP address on a specific subnet in the
Alternate Management Network.
3 Procedure 3: Create a dial-up connection – Using Windows New Connection Wizard.
4 Procedure 4: Connect to the Collaboration Server – Via the RMX Manager.
Procedure 1: Install the RMX Manager
Before installing the RMX Manager, verify that you have at least 150Mb of free space on your workstation.
For more information see
Procedure 2: Configure the Modem
Configure the modem with the following settings.
● IP address – near
● Subnet Mask –
Procedure 3: Create a Dial-up Connection
This procedure is performed once. Only the Dial field in the Connect applet (see step 10 on
button to establish a connection to LAN 3 Port via the
modems.
To create a dial-up connection:
1 In Windows, navigate via the Control Panel to the Network Connections applet and select Create
a new connection.
Polycom®, Inc.
Appendix G - Configuring Direct Connections to the Collaboration Server
Installing the RMX Manager
169.254.192.nn
255.255.240.0
Application.
modem.) is modified for connection to different
Click the Dial
977