Automatic Muting Of Noisy Endpoints At The Mcu Level - Polycom RealPresence RMX 1500 Administrator's Manual

To disable/enable the automatic muting of noisy endpoints in the Conference Profile:
1 In a new or existing Conference Profile, click the Audio Settings tab.
 In new Profiles, the Auto mute noisy endpoints check box is selected by default.
 In existing profiles (after software upgrade from a version prior to 8.1), the Auto mute noisy
endpoints check box is cleared.
2 To enable the automatic muting of noisy endpoints, click the Auto mute noisy endpoints check
box.
3 Click OK.

Automatic Muting of Noisy Endpoints at the MCU Level

You can disable the automatic muting of noisy endpoints at the MCU level by changing the
ENABLE_SELECTIVE_MIXING flag setting to NO.
In such a case, the automatic muting of noisy endpoints at the conference level (in the Conference Profile
- Audio Settings dialog box) is disabled.
To modify the system flag setting:
● To modify ENABLE_SELECTIVE_MIXING flag setting to NO, manually add it to system.cfg file and
set its value to NO.
For more details, see the
Polycom®, Inc.
Modifying System Flags.
Additional Conferencing Information
220