Polycom RealPresence RMX 1500 Administrator's Manual page 975

Event Fields for Events 108, 112 - OPERATOR MOVE PARTY TO CONFERENCE,OPERATOR ATTEND PARTY
TO CONFERENCE
Field Description
Bonding Mode Possible values are:
0 - Bonding is disabled
1 - Bonding is enabled
255 -
Note: This field is only relevant to ISDN/PSTN participants.
Number Of The number of channels, as follows:
Channels
255 - Auto
Otherwise, in range of 1 - 30
Note: This field is only relevant to ISDN/PSTN participants.
Net Channel Width The bandwidth of each channel.
This value is always 0, which represents a bandwidth of 1B, which is the only bandwidth that
is currently supported.
Net Service Name The name of the Network Service.
An empty field "" indicates the default Network Service.
Restrict Indicates whether or not the line is restricted, as follows:
27 - Restricted line
28 - Non restricted line
255 - Unknown or not relevant
Voice Mode Indicates whether or not the participant is an Audio Only participant, as follows:
0 - The participant is not an Audio Only participant
1 - The participant is an Audio Only participant
255 - Unknown
Number Type The type of telephone number, as follows:
0 - Unknown
1 - International
2 - National
3 - Network specific
4 - Subscriber
6 - Abbreviated
255 - Taken from Network Service, default
Note: This field is only relevant to dial-out, ISDN/PSTN participants.
Net SubService The network sub-service name.
Name
An empty field "" means that MCU selects the default sub-service.
Note: This field is only relevant to dial-out, ISDN/PSTN participants.
Polycom®, Inc.

Auto
Appendix C - CDR Fields, Unformatted File
944