Polycom RealPresence RMX 1500 Administrator's Manual page 85

New AVC CP Profile - Video Quality Parameters
Field/Option
Send Content to
Legacy Endpoints
(CP / mixed CP and
SVC)
H.264 High Profile
(Not displayed with
MPMx media cards.)
Polycom®, Inc.
Description
When enabled (default) Content can be sent to H.323/SIP/ISDN endpoints that do
not support H.239 Content (legacy endpoints) over the video (people) channel. For
more information see Sending Content to Legacy
Notes:
• When enabled, an additional HD video resource is allocated to the conference.
• This option is valid when sending Content as a separate stream is enabled by
setting the System Flag ENABLE_H239 to YES.
• Select this option when Avaya IP Softphone will be connecting to the conference.
• In Video Switching Conferencing Mode the Send Content to Legacy Endpoints
option is disabled.
• If the Same Layout option is selected, the Send Content to Legacy Endpoints
selection is cleared and disabled.
• Once an endpoint is categorized as Legacy, it will not be able to restore its
content to the Content channel and will receive content only in the video channel.
Displayed only when the Conferencing Mode is VSW (Video Switching) and H.263
& H.264 Auto Selection or H.264 HD is the selected in Content Protocol, Base
Profile or High Profile will be auto selected based on the endpoint's capability (up to
HD1080p60).
Defining AVC-Based Conference Profiles
Endpoints.
54