Field Description - Polycom RealPresence Getting Started Manual

Polycom® RealPresence Collaboration Server 800s Getting Started Guide
13 Enter the required SIP Server information in the dialog box.
2-16
Table 2-6 Fast Configuration Wizard – SIP Server
Field
SIP Server
SIP Server IP
Address
Transport Type
Description
Select:
•
Specify – to manually configure SIP servers.
•
Off – if SIP servers are not present in the network.
Enter either the IP address of the preferred SIP server or its host
name (if a DNS server is used).
Select the transport type and protocol that is used for signaling
between the MCU and the SIP Server or the endpoints according to
the protocol supported by the SIP Server:
•
UDP – Select this option to use UDP for signaling.
•
TCP – Select this option to use TCP for signaling.
•
TLS – The Signaling Host listens on secured port 5061 only and
all outgoing connections are established on secured connections.
Calls from SIP clients or servers to non secured ports are
rejected.
The following protocols are supported:
•
TLS 1.0
•
SSL 2.0
•
SSL 3.0.
Polycom, Inc.