Laser Emission Area; Main Scanning Direction; Sub-Scanning Direction - Konica Minolta bizhub 160 Service Manual

9. PH (Print Head) section
9.4

Laser Emission Area

9.4.1

Main Scanning Direction

• The print start position is determined by the main scanning print start signal (/HSYNC)
output from the Controller/Mechanical Control Board and the width of the paper.
• The laser emission area is determined by the paper size.
9.4.2

Sub-scanning Direction

• The print start position is determined by the sub-scanning print start signal (/TOD) output
from the Controller/Mechanical Control Board and the length of the paper.
• The laser emission area is determined by the paper size.
/HSYNC
/VIDEO
32
Theory of Operation Ver. 1.0 Apr. 2005
/VIDEO /TOD
4980M016AB