External Expansion Modules - Avaya IP500 V2 Installation Manual

1.9 External Expansion Modules

These modules can be used to add additional ports to an IP Office systems. The number of external expansion modules
supported depends on the control unit type. Each module uses an external
module. A locale specific
· Systems running in IP Office Basic Edition modes support up to 8 external expansion modules so long as the
system extensions limit is not exceeded.
· Systems running in IP Office standard modes support 8 external expansion modules or 12 if the control unit is fitted
with an IP500 4-Port Expansion Base Card.
· Each external expansion module is supplied with a blue 1 meter (3'3'') expansion interconnect cable. This
cable must be used when connecting to expansion ports on the rear of a control unit.
· When connecting to expansion ports on an IP500 4-Port Expansion card, a yellow 2 meter (6'6") expansion
interconnect cable can be used in place of the standard blue cable. 4 Yellow cables are supplied with the IP500
4-Port Expansion card.
IP500 External Expansion Modules
Expansion modules include an external power supply unit (PSU) and a 1m blue interconnect cable. They do not include a
locale specific power cord for the external PSU or any phone extension cables.
Variant
Digital Phones (Non-IP)
IPO 500 Digital Station 16
IPO 500 Digital Station 30
IPO 500 Digital Station 16A (RJ21)
IPO 500 Digital Station 30A (RJ21)
IPO 500 Digital Station 16B
IPO 500 Digital Station 30B
Analog Phones
IPO 500 Phone 16
IPO 500 Phone 30
Others
IPO 500 Analog Trunk 16
IPO 500 BRI So8
Installing IP500/IP500 V2
IP Office 9.0
power cord for the PSU must be ordered separately.
40
IP500 System with External Expansion Module
252
252
243
power supply unit
Country
245
245
247
250
250
250
US
241
supplied with the
39
SAP Code
All 700449499
All 700426216
All 700500699
All 700500698
All 700501585
All 700501586
All 700449507
All 700426224
700449473
All 700449515
15-601042 Issue 28c (19 August 2013)
Page 32