9611G - Avaya IP500 V2 Installation Manual

10.11.46 9611G

· This phone is supported by the IP Office Release 8.0 Q1 2012 Service Pack and higher. The voice activated dialing
and USB features are not supported.
· The previous restrictions against using the IP Office system as the HTTP file server for this type of phone have been
removed.
The phones supports 24 programmable buttons. These can be used for call appearance functions and other IP Office
features.
This phone can be used with up to 3 x BM12 button module. Each module provides an additional 24 programmable
buttons. Attaching button modules may change the phones PoE class and may require a separate power supply.
If not being powered by PoE, these telephones do not support the former 1151 and 1152 series of Avaya single phone
power supply units. Instead an Avaya Single Port PoE injector (SPPOE-1A) should be used.
Variant
9611 Telephone
Single Port PoE Injector (SPPOE-1A)
BM12 Button Module
Installing IP500/IP500 V2
IP Office 9.0
System Components: Phones
SAP Code
Charcoal Grey 700480593
– 700500725
Charcoal Grey 700480643
15-601042 Issue 28c (19 August 2013)
Page 327