Adding A Pre-Built Configuration File; Adding A License File; Adding A 9600 Series Screen Saver File - Avaya IP500 V2 Installation Manual

4.4.3 Adding a Pre-Built Configuration File

IP Office Manager can be used to
Office configuration file can be placed on the System SD card. That file will then be used when the IP Office system is
started.
To load a pre-built offline configuration onto a System SD card
1. Using IP Office, create an offline configuration that matches the customer requirements and the equipment that will
be installed in the IP Office.
2. Rename the configuration file config.cfg.
3. Using a card reader, copy the file into the /system/primary folder on the System SD memory card.

4.4.4 Adding a License File

For IP500 V2 control units, if a licence file called keys.txt is found in the SD card folder which the IP Office uses when it
boots, the IP Office will merge the licenses in that file with its configuration.
The files should be a plain text file (UTF8) containing either:
· A license name and license key separated by a
comma on each line.
· A license key on each line.
To load a License File onto a system SD card
1. Using a card reader, copy the file into the /system/primary folder on the System SD memory card.

4.4.5 Adding a 9600 Series Screen Saver File

When idle, 9600 Series phones can timeout to displaying a screen saver image. A file, 96xxiposs.jpg, is present on the
cards by default.
You can replace this file with your own branded file. The file should be smaller than the screen size on 9600 Series phones
in order to then be moved around the screen.
Phone Maximum Size
9620 232 x 69
9620L 232 x 69
9620C 232 x 69
· Color Displays: Color depth is 16 bit. A separate color image will look best.
· Non-Color Displays: Best results are achieved with a single grayscale logo image. 2 levels of grayscale are also
supported.
· To invoke transparent backgrounds with logos, use a background color of 0,255,0 (brightest possible green).
Installing IP500/IP500 V2
IP Office 9.0
create an offline configuration file
Phone
9621G
9630
9640
IP500 V2 Installation: SD Card Preparation
. For IP500 V2 control units, such a pre-created IP
80
Teleworker, uAuToY@9VvVV@VOzIgeegwLXL2sAs1Z5
Mobile Worker, NvWO_iVY5KJpZMNeY89IB1sIj0_QUCDm
Power User, 9IJQW3yuPsbxjGS2XcMa16_J9H8cSeZ9
System Advanced, JAWZaw@YtK37vcnXkqM4mDYDIdSMd9_1
uAuToY@9VvVV@VOzIgeegwLXL2sAs1Z5
NvWO_iVY5KJpZMNeY89IB1sIj0_QUCDm
9IJQW3yuPsbxjGS2XcMa16_J9H8cSeZ9
JAWZaw@YtK37vcnXkqM4mDYDIdSMd9_1
Maximum Size Phone
350 x 153 9641G
232 x 140 9650
232 x 140 9650C
Maximum Size
480 x 272
232 x 140
232 x 140
15-601042 Issue 28c (19 August 2013)
Page 81