Sd Card Preparation - Avaya IP500 V2 Installation Manual

4.4 SD Card Preparation

New IP500 V2 control units are supplied with no installed firmware or configuration. When first powered up, the control
unit loads and installs the necessary firmware from the System SD card installed in it. It then creates a default
configuration matching the physical cards already installed in the control unit and any external expansion modules already
attached to it.
You can perform a number of additional actions prior to installing the System SD card in order to pre-configure the
system.
Upgrade the Card Firmware
·
Add a Configuration File
·
Add a License File
·
Add Music on Hold Files
·
Add a 9600 Screen Saver Image File
·
Additional actions that can be performed on SD cards are detailed in the
Installing IP500/IP500 V2
IP Office 9.0
79
81
81
82
81
SD Card Management
122
15-601042 Issue 28c (19 August 2013)
section.
Page 78