Digital Station 16A/30A - Avaya IP500 V2 Installation Manual

10.5.4 Digital Station 16A/30A

These modules can be used to add additional
The module is available in 16 and 30 port variants, referred to as the IP500 DS16A and IP500 DS30A respectively.
The modules use RJ21 connectors; 1 on the 16 port version, 2 on the 30 port version. For TCM connections using RJ45
port, use the IP500 DS16B/30B modules
Feature Details
Supported on IP500 V2 only.
Locales Supported in all
Software Level IP Office Release 7.0 minimum (TCM only). Bin file = nadcpaV1.bin.
Included Power supply unit (see below) and Expansion Interconnect cable.
Power Supply The module is supplied with a Earthed 3-Pin, 60W external power supply module. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific
power cord
Mounting The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be wall or rack mounted using the
Dimensions Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".
Weight Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30A RJ21)
Module Front
Port · Green On = Phone detected.
LEDs
Module The center LED on all external expansion modules is used to indicate the overall state of the module as
Center follows:
LED
· Red flashing = Module starting up/Loading firmware.
· Red on = Error.
· Green on = Module okay.
· Green flashing = Module starting up/Loading firmware (IP500 DS16A/30A module only).
Installing IP500/IP500 V2
IP Office 9.0
TCM ports
401
.
250
IP Office locales .
51
for the external PSU is required but is not supplied with the module.
39
System Components: IP500 External Expansion Modules
for TCM phones, for example M-Series and T-Series phones.
IPO IP500 RACK MNTG KIT V3
IEC60320 C13
15-601042 Issue 28c (19 August 2013)
.
278
Page 247