So8 - Avaya IP500 V2 Installation Manual

10.9.6 So8

The So8 module is used to add ETSI BRI S0-interface ports to the IP Office system. These ports can then be used for the
connection of ISDN devices.
Feature Details
Supported on All IP Office control units except Small Office Edition.
Locales Supported in all
Software Level IP Office core software level 1.0 minimum. Bin file = nas0-16.bin.
Included Power supply unit (see below) and Expansion Interconnect cable.
Power Supply The unit is supplied with an earthed 3-Pin, 60W external power supply unit. The PSU has an integral
power cord for connection to the unit's DC I/P socket. A locale specific
39
· Older units were supplied with a 2-Pin, 40W external power supply unit which used a locale
specific locale specific
Mounting The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP400 Rack
Mounting Kit.
Dimensions Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.
Weight Unboxed: 2.8Kg/6.3lbs. Boxed: 4.1Kg/9.2lbs.
Module Front
Installing IP500/IP500 V2
IP Office 9.0
IP Office locales
for the external PSU is required but is not supplied with the unit.
IEC60320 C7 power cord
.
51
.
39
IEC60320 C13 power cord
15-601042 Issue 28c (19 August 2013)
Page 276