Changing Components - Avaya IP500 V2 Installation Manual

8.3 Changing Components

Except for memory cards (see
and added to an IP Office system when that system is
In the sections below, the term component can refer to a card fitted into the IP Office or an external expansion module.
Note that for extension ports, by default both an extension entry and a user entry will exist in the IP Office configuration.
Extension entries can be deleted without deleting the corresponding user entry. This allows retention of the user settings
and association of the user with a different extension by changing that extensions Base Extension number to match the
user's Extension ID.
Processes
Like for like replacement
·
Higher capacity component replacement
·
Lower capacity component replacement
·
Adding a new component
·
Permanent removal of a component
·
Replacement with a different type of component
·
Installing IP500/IP500 V2
IP Office 9.0
Memory Card Removal
140
switched off
150
150
150
150
151
Additional Processes: Rebooting a System
), cards and external expansions modules must only be removed
.
145
151
15-601042 Issue 28c (19 August 2013)
Page 149