Avaya IP500 V2 Installation Manual page 251

Module Rear
Port Description
DC I/P DC power input port. Used for connection of the power lead from an Avaya earthed 60W external
393
power supply unit supplied with the expansion module. A locale specific
for the external PSU is required but is not supplied with the module.
DS RJ45 socket. Digital Station port. Used for connection of IP Office
393
connected to an
barrier devices in addition to the buildings primary protection. The module must also be connected to
a protective ground.
DTE 9-Way D-Type socket. For Avaya use only.
EXPANSION RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
395
Expansion Interconnect cable supplied with the module.
Protective Ground point. Use of a protective ground is required for all installations, see
(Earthing)
Phone Barrier Box V2 (101V) is required at both ends, see
Connections
Part Codes and Related Equipment
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system. Expansion modules include an external power supply unit (PSU) and an appropriate
interconnect cable. They do not include a locale specific power cord for the external PSU or any phone extension cables.
Item
IPO IP500 EXP MOD DGTL STA 16
IPO IP500 EXP MOD DGTL STA 30
IEC60320 C13 Power Cord
Mounting Kit
205
Installing IP500/IP500 V2
IP Office 9.0
out-of-building extension
. Where the module is connected to analog extensions in another building, an IP Office
92
.
45
Variant
16 Ports
30 Ports
CEE7/7
BS1363
NEMA5-15P
IPO IP500 RACK MNTG KIT V3
System Components: IP500 External Expansion Modules
supported DS phones
, the connection must be made via additional IROB
45
Lightning Protection/Out-of-Building
15-601042 Issue 28c (19 August 2013)
IEC60320 C13 power cord
. If
48
Grounding
Country SAP Code
All 700501585
All 700501586
Europe 700289762
United Kingdom 700289747
America 700289770
All 700503160
39
Page 251