Legacy Card Carrier - Avaya IP500 V2 Installation Manual

10.3.8 Legacy Card Carrier

The IP500 Legacy Card Carrier base card can be used to fit IP Office IP400 cards into the IP500 or IP500 V2 control unit.
This can include IP400 trunk and IP400 VCM cards. Up to 2 Legacy Card Carrier cards are supported in a control unit.
Name
IPO 500 LEGACY CARD CARRIER
Installing IP500/IP500 V2
IP Office 9.0
· Supports
The following IP400 cards are supported. Cards not listed are not
supported.
PRI T1
Dual PRI T1
PRI 30 E1 (1.4)
Dual PRI E1
· IP400 PRI trunk cards fitted to IP500/IP500 V2 systems do not
require trunk licenses.
· IP500 Control Unit:
· IP500 V2 Control Unit:
· Maximum per Control Unit: 2.
· IP500 Trunk Card Support:
Panels on the front of the carrier card can be snapped off to match the
port connects when fitting an IP500 trunk card.
Description
IP Office 500 Carrier Card
PRI 30 E1R2 RJ45
Dual PRI E1R2 RJ45
BRI-8 (UNI)
ANLG 4 Uni (US only)
.
SAP Code
700417215
15-601042 Issue 28c (19 August 2013)
VCM 4
VCM 8
VCM 16
VCM 24
VCM 30
Page 230