Analog Trunk 16 - Avaya IP500 V2 Installation Manual

10.9.1 Analog Trunk 16

The IP400 Analog Trunk module (also known as the ATM16) is used to add 16 additional analog trunks to an IP Office
system. The module supports both loop-start and, with suitable grounding, ground-start trunks.
WARNING
·
In all IP Office installations, any module being used for analog trunk connections must be connected to a
earth .
44
WARNING
·
Within the Republic of South Africa and in areas of high lightning risk, any module using analog trunk connections
must be connected to a
Feature Details
Supported on All IP Office control units except Small Office Edition.
Locales Specific variants are provided for different IP Office locales, see below.
Software Level IP Office core software level 1.0 minimum. Bin file = naatm16.bin.
Included Power supply unit (see below) and Expansion Interconnect cable.
Power Supply The module is supplied with a 2-pin, 40W external power supply unit. The PSU has an integral
power cord for connection to the module's DC I/P socket. A locale specific
cord
Mounting The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP400 Rack
Mounting Kit.
Dimensions Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.
Weight Unboxed: 2.9Kg/6.6lbs. Boxed: 4.2Kg/9.4lbs.
Module Front
Installing IP500/IP500 V2
IP Office 9.0
protective ground and to
44
for the external PSU is required but is not supplied with the module.
39
surge protection equipment .
45
IEC60320 C7 power
15-601042 Issue 28c (19 August 2013)
functional
Page 266