Avaya IP500 V2 Installation Manual page 27

IP500 Legacy Card Carrier Base Card
IP500 4-Port Expansion Base Card
IP500 BRI Combination Card
IP500 ATM Combination Card/IP500 ATM Combination Card V2
Installing IP500/IP500 V2
IP Office 9.0
230
This card allows various
to be used. The front of the card includes panels that can be removed
to match the trunk card fitted.
· This card does not accept any IP500 trunk daughter card.
· Maximum: 2 per control unit.
· IP400 Cards Supported: The following cards are supported.
PRI T1
Dual PRI T1
PRI 30 E1 (1.4)
Dual PRI E1
220
This card adds an additional 4 expansion ports for external expansion modules. The
card is supplied with four 2m yellow interconnect cables.
· This card does not accept any IP500 trunk daughter card.
· Maximum: 1 per control unit (Right-hand slot 4 only).
· Supported Expansion Modules: The following external expansion modules are
supported:
· IP500 Analogue Trunk Module
· IP500 BRI So Module
· IP500 Digital Station Module
· IP500 Digital Station Module A
224
This card provides 6 digital station ports (1-6), 2 analog extension ports
(7-8) and 2 BRI trunk ports (9-10, 4 channels). The card also includes
10 voice compression channels.
· This card has a pre-installed
· Maximum: 2 combination cards per IP500 V2 control unit,
regardless of type. Not supported by IP500 control units.
· IP Office Basic Edition - Norstar Mode and IP Office Basic Edition
systems are limited to a maximum of 12 BRI channels using BRI
Combination and or BRI trunk daughter cards.
This card provides 6 digital station ports (1-6), 2 analog extension ports
(7-8) and 4 analog trunk ports (9-12). The card also includes 10 voice
compression channels.
· This card has a pre-installed
· Maximum: 2 combination cards per IP500 V2 control unit,
regardless of type. Not supported by IP500 control units.
· The analog phone ports do not include a ringing capacitor. Where
this is a requirement, connection should be via a Master socket
containing ringing capacitors.
· If fitted with an IP500 Analog Trunk daughter card, during power
failure phone port 8 is connected to analog trunk port 12.
System Overview: Control Unit Cards
IP400 trunk cards and
30
PRI 30 E1R2 RJ45
Dual PRI E1R2 RJ45
BRI-8 (UNI)
ANLG 4 Uni (US only)
· IP500 Digital Station Module B
· IP500 Phone Module
· IP400 Digital Station V2 Modules
· IP400 Phone V2 Modules
IP500 BRI trunk daughter card
222
IP500 analog trunk daughter card
15-601042 Issue 28c (19 August 2013)
IP400 VCM cards
31
VCM 4
VCM 8
VCM 16
VCM 24
VCM 30
.
29
.
29
Page 27