Avaya IP500 V2 Installation Manual page 216

Ports Description
AUDIO 3.5mm Stereo jack socket. Used for external music on hold source input.
390
CPU
· Alternate red/green = Starting up.
· Green on = Okay.
C/F
· Off = Card shutdown.
· Green on = Card present.
· Green flashing = Card in use.
· Orange steady = Reset imminent.
C/F TII Used to house the optional Embedded Voicemail card.
EXPANSION RJ45 socket. Used for direct connection to external expansion modules using the Expansion Interconnect
395 cable supplied with the expansion module.
EXT O/P 3.5mm Stereo jack socket. Used for switching external relay systems such as door entry controls. The
173
port contains two independent switches controlled by the IP Office.
INPUT AC power input port.
LAN RJ45 socket. With the WAN port forms a managed layer 3 Ethernet switch. The ports are full-duplex
396
10/100Mbps auto-sensing, MDI crossover ports.
RESET This switch is used to restart the IP Office, optionally erasing the configuration and or the core software in
181
the process. See
RS232 9-Way D-Type socket. Used for system maintenance.
USB Not used.
RJ45 socket. With the LAN port forms a managed layer 3 Ethernet switch. The ports are full-duplex
WAN
396
10/100Mbps auto-sensing, MDI crossover ports.
Used for connection of a
recommended and for some locales may be a regulatory requirement.
Installing IP500/IP500 V2
IP Office 9.0
Reset Button .
181
functional or protective ground
· Red on = No software.
· Flashing Red = Error/Shutdown.
· Red flashing = Card initializing or shutting
down.
· Red fast flashing = card full
· Red steady = Card failure/wrong type.
. Use of a ground for all systems is
208
15-601042 Issue 28c (19 August 2013)
Page 216