Audio Conferencing Unit - Avaya IP500 V2 Installation Manual

10.11.53 Audio Conferencing Unit

Avaya M and T-Series phones are supported by IP Office Release 7.0 and higher on an IP500 V2. They can be connected
to digital station ports provided by an
DS30B external expansion module
The Audio Conferencing Unit (ACU) is a multiple microphone desktop conferencing unit. The Audio Conferencing unit only
supports the following Feature codes:
· Speeddial: Feature 0
This feature code can be used to dial a stored number.
· If Feature 0 is followed by a 3-dight number in the range 000 to 255, the system directory entry with the
matching index is dialed.
· If Feature 0 is followed by * and a 2-digit number in the range 71 to 94, the personal directory entry with the
matching index is dialed.
· Hold/Switch Calls: Feature 2
This feature code will hold the current call. If there was already a call on hold, the feature code will switch between
calls.
· Conference: Feature 3
If the Audio Conferencing Unit has a call connected and another call on hold, using this feature code will conference
the unit and those calls.
· Last Number Redial: Feature 5
When the phone is idle, this feature code can be used to redial the last number dialed from the Audio Conferencing
Unit.
Installing IP500/IP500 V2
IP Office 9.0
IP500 TCM8 base card
.
250
, DS16A/DS30A external expansion module
231
15-601042 Issue 28c (19 August 2013)
or DS16B/
247
Page 338