Pri Port - Avaya IP500 V2 Installation Manual

10.15.15 PRI Port

These ports are used for connection to PRI trunk services including E1, T1 and E1-R2.
PRI Trunk Cable
This cable is used to connect from IP Office PRI trunk ports to the line providers network termination equipment. If that
equipment does not use RJ45 sockets, the cable may need to be stripped and rewired or an alternate cable used. The
appropriate signal pin-outs and wire colours are detailed below.
IP Office
RJ45
· Supply: PRI trunks cards are not supplied with these cables.
· Cable Color: Red.
· SAP Code: 700213440.
· Standard Length: 3m/9'10".
Installing IP500/IP500 V2
IP Office 9.0
Wire
PRI
1 Rx-A White/Orange
2 Rx-B Orange/White
3 – White/Green
4 Tx-A Blue/White
5 Tx-B White/Blue
6 – Green/White
7 – White/Brown
8 – Brown/White
System Components: Physical Ports
Network Termination
PIN RJ45
1
2
3
4
5
6
7
8
15-601042 Issue 28c (19 August 2013)
Page 399