Avaya IP500 V2 Installation Manual page 13

1. System Overview
This document is intended to assist with the installation of an IP Office system running in IP Office standard mode (IP
Office Essential Edition, IP Office Preferred Edition or IP Office Advanced Edition) using an IP500 or IP500 V2 control unit.
This documentation does not cover installation of IP Office Basic Edition, IP Office Basic Edition - Norstar Mode or IP Office
Basic Edition - PARTNER® Mode systems which each have their own separate installation documentation.
· The IP Office is a converged voice and data communications system. It should therefore only be installed by
persons with telephony and IP data network experience.
· Installers must be trained on IP Office systems. Through its
training courses including specific IP Officeimplementation and installation training. It also provides certification
schemes for installers to achieve various levels of IP Office accreditation.
· It is the installer's responsibility to ensure that all installation work is done in accordance with local and national
regulations and requirements. It is also their responsibility to accurately establish the customer's requirements
before installation and to ensure that the installation meets those requirements.
· You should read and understand this documentation before installation. You should also obtain and read the Avaya
Technical Bulletins relevant to recent software and hardware releases to ensure that you are familiar with any
changes to the IP Office equipment and software.
Installing IP500/IP500 V2
IP Office 9.0
Avaya University (AU), Avaya provides a range of
56
15-601042 Issue 28c (19 August 2013)
System Overview:
Page 13