Reboot A System Using Ip Office Web Manager; Reboot A System Using The Reset Button; Rebooting A System Using A System Phone - Avaya IP500 V2 Installation Manual

8.2.2 Reboot a System Using IP Office Web Manager

To reboot a system using IP Office Web Manager
1. Login to IP Office Web Manager.
a. Enter the systems IP address in the browser. Select IP Office Web Manager. Alternatively, enter https://
<IP_Address>:8443/WebMgmtEE/WebManagement.html.
b. Enter an administrator user name and password and click Login.
2. Click Advanced and select Reboot.
3. Select when the reboot should occur.
· Immediate
Reboot the system immediately.
· Free
Reboot the system when there are no calls in progress.
· Timed
Reboot the system at the set time.
4. Click OK.

8.2.3 Reboot a System Using the Reset Button

To reboot a system using the Reset button
Use this process to reboot the system when free. Once invoked, the system bars any new incoming or outgoing calls until
after the reboot.
1. On the rear of the control unit, press and hold the Reset button for between 5 to 10 seconds until the CPU led
changes to steady orange.
2. When the CPU LED changes to steady orange, release the button.
· If the CPU LED changed to flashing orange or red, keep the button held until the CPU LED changes to flashing
green. Then release the button and reattempt the process once the CPU LED has returned to steady green.
3. Wait for the reboot to complete before performing any other actions.

8.2.4 Rebooting a System Using a System Phone

This function is not supported from system phones on system's running in IP Office standard mode.
Installing IP500/IP500 V2
IP Office 9.0 15-601042 Issue 28c (19 August 2013)
Page 148