Avaya IP500 V2 Installation Manual page 277

Module Rear
Ports Description
BRI RJ45 socket. Used for connection of ISDN terminal devices.
391
Note: These ports appear a lines within the IP Office configuration. However they cannot be used for
connection to external BRI lines.
DC I/P DC power input port. Used for connection of the power lead from an Avaya 60W external power supply
393
unit supplied with the expansion module. A locale specific
PSU is required but is not supplied with the module.
DTE 25-Way D-Type socket. For Avaya use only.
EXPANSION RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
395 Expansion Interconnect cable supplied with the module.
Function ground point. Used for connection of a
modules where this screw is not present, the top-center cover screw should be used instead.
Part Codes and Related Equipment
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system. Expansion modules include an external power supply unit (PSU) and an appropriate
interconnect cable. They do not include a locale specific power cord for the external PSU or any phone extension cables.
Item
IP400 So8
IEC60320 C13 Power Cord
IP400 Rack Mounting Kit
Installing IP500/IP500 V2
IP Office 9.0
System Components: IP400 Expansion Modules
IEC60320 C13 power cord
protective or functional ground
Variant Country
All
CEE7/7 Europe
BS1363 United Kingdom
NEMA5-15P America
All
for the external
39
if required. On older
44
SAP Code
700185077
700289762
700289747
700289770
700210800
15-601042 Issue 28c (19 August 2013)
Page 277