Avaya IP500 V2 Installation Manual page 271

Module Rear
Ports Description
DC I/P DC power input port. Used for connection of the power lead from an Avaya 40W external power
393
supply unit supplied with the expansion module. A locale specific
external PSU is required but is not supplied with the module.
DS Digital Station port. Used for connection of IP Office
393
of-building extension
to the buildings primary protection. The module must also be connected to a protective ground.
DTE 25-Way D-Type socket. For Avaya use only.
EXPANSION RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
395
Expansion Interconnect cable supplied with the module.
Ground point. Used for connection of a
modules where this screw is not present, the top-center cover screw should be used instead.
Must be connected if any
Part Codes and Related Equipment
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system. Expansion modules include an external power supply unit (PSU) and an appropriate
interconnect cable. They do not include a locale specific power cord for the external PSU or any phone extension cables.
Item
IP400 Digital Station
IEC60320 C7 Power Cord
IP400 Rack Mounting Kit
Installing IP500/IP500 V2
IP Office 9.0
, the connection must be made via additional IROB barrier devices in addition
45
protective or functional ground
out-of-building extensions
Variant Country
16 Ports All
30 Ports
CEE7/16 Europe
BS1363 United Kingdom
NEMA1-15 America
Korea Korea
All
System Components: IP400 Expansion Modules
IEC60320 C7 power cord
supported DS phones
48
if required. On older
208
are connected to this module.
45
SAP Code
700184807
700184880
700213382
700213374
700213390
700254519
700210800
15-601042 Issue 28c (19 August 2013)
for the
39
. If connected to an out-
Page 271