4-Port Expansion Card - Avaya IP500 V2 Installation Manual

10.3.1 4-Port Expansion Card

This card is used to add 4 additional expansion ports to the IP500 and IP500 V2 control unit. This card is only supported in
slot 4.
· Each external expansion module is supplied with a blue 1 meter (3'3'') expansion interconnect cable. This
cable must be used when connecting to expansion ports on the rear of a control unit.
· When connecting to expansion ports on an IP500 4-Port Expansion card, a yellow 2 meter (6'6") expansion
interconnect cable can be used in place of the standard blue cable. 4 Yellow cables are supplied with the IP500
4-Port Expansion card.
Name
IPO IP500 EXP CARD 4PT
IPO EXP CABLE RJ45/RJ45 2M YELLOW
Installing IP500/IP500 V2
IP Office 9.0
· Supports
Provides 4 additional
modules.
· Supported Expansion Modules: The following external expansion modules are
supported:
· IP500 Analogue Trunk Module
· IP500 BRI So Module
· IP500 Digital Station Module
· IP500 Digital Station Module A
· IP500 Control Unit:
· IP500 V2 Control Unit:
· Maximum per Control Unit: 1 - Right hand slot 4 only.
· IP500 Trunk Card Support:
· LEDs 1 to 8 are used for the expansion ports on the rear of the control unit.
LEDs 9 to 12 are used for the card's own expansion ports.
Green On
Red Flashing
Red On
Orange Regular Flash
Description
Includes 4 yellow 2 metre interconnect cables.
Only for use with the 4-Port Expansion card.
expansion ports for connection of external expansion
395
· IP500 Digital Station Module B
· IP500 Phone Module
· IP400 Digital Station V2 Modules
· IP400 Phone V2 Modules
.
Expansion module present.
Initializing.
Error.
Base card okay.
15-601042 Issue 28c (19 August 2013)
SAP Code
700472889
700472871
Page 220