Lan Port - Avaya IP500 V2 Installation Manual

10.15.12 LAN Port

These ports are found on IP Office control units. They are used for connection to IP LANs and IP devices.
All IP Office LAN ports are 10/100Mbps auto-sensing. Operation varies as follows:
· IP Office 500 / IP500 V2
The ports are full-duplex 10/100Mbps auto-sensing, MDI crossover ports. They form a managed layer 3 Ethernet
switch. The WAN port is not supported on systems running in IP Office Basic Edition - PARTNER® Mode, IP Office
Basic Edition - Norstar Mode or IP Office Basic Editions.
The LEDs are used as follows:
· Green: On = connected, Flashing = Activity.
· Yellow: On = 100Mbps, Off = 10Mbps.
LAN Cables
These are CAT5 UTP cables for connection of various IP devices within the IP Office system.
IP Office
LAN Pin
1
2
3
4
5
6
7
8
· SAP Code:
· LAN Cable - GREY: 700213481.
Standard straight LAN cable.
· LAN Crossover Cable - Black: 700213473.
LAN crossover cable.
Installing IP500/IP500 V2
IP Office 9.0
MDIX MDI
(Normal) (Crossover)
Rx-A. Tx-A.
Rx-B. Tx-B.
Tx-A. Rx-A.
Not used. Not used.
Not used. Not used.
Tx-B. Rx-B.
Not used. Not used.
Not used. Not used.
Wire Standard/
Interconnect
White/Orange 1
Orange/White 2
White/Green 3
Blue/White 4
White/Blue 5
Green/White 6
White/Brown 7
Brown/White 8
Crossover
3
6
1
4
5
2
7
8
15-601042 Issue 28c (19 August 2013)
Page 396