Using A Control Unit Memory Card For Tftp - Avaya 4600 Series Installation Manual

Ip office 3.1
Hide thumbs Also See for 4600 Series:
Table of Contents

Advertisement

IP Phone Installation Manual

Using a Control Unit Memory Card for TFTP

The Compact Flash memory card used with the Small Office Edition and IP406 V2 systems can be used
to store files other than those used for embedded voicemail.
Non-Avaya supplied Compact Flash memory cards can be used for this type of file storage.
However they will not support embedded voicemail.
If an Avaya supplied memory card is used, any files stored in this way will reduce the message
storage capacity of the Compact Flash memory card.
Configuring the File Source
This process allows a specified PC to send files to the memory card and tells the IP Office system to use
the memory card
1. Using Manager, click
2. On the System tab of the System form, set the File Writer IP Address to the IP address of the
PC from which sending files to the memory card will be allowed.
3. Use
to send this configuration back to the control unit and allow it to reboot.
4. Within Windows, select Start | Run.
5. Enter cmd and click OK.
6. Within the command window, you can use TFTP to upload files to the memory card. For
example:
c:\tftp -i 192.168.42.1 put d:\IPSets Firmware\4601dbtel1_82.bin
7. The above command will send the file d:\IPSets Firmware\4601dbtel1_82.bin to the IP Office
control units LAN1 IP address, in the above example 192.168.42.1. For additional information
about the TFTP command, just enter TFTP. If a destination needs specifying, the memory card is
treated as the IP Office's drive a:.
8. Using Manager, click
9. On the System tab of the System form, set the TFTP Server IP Address to the control unit's
own LAN1 IP address.
10. Use
to send the configuration back to the IP Office system and allow it to reboot. The IP Office
system will now look on the memory card for any files it needs to download following a reboot.
11. If in future an upgrade or file transfer from the Manager PC is required, the TFTP Server IP
Address will first need to be changed back to the Manager PC's IP address.
IP Phone Installation
IP Office 3.1
to receive the IP Office system's configuration.
to receive the IP Office system's configuration again.
Issue 11c (14th September 2005)
Page 18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents