Initial setup and connectivity
Wall mounting Avaya J100 Expansion Module
About this task
If your phone is wall mounted, you must additionally install the wall mount for the Avaya J100
Expansion Module. You must separately purchase the wall mount for the expansion module. The
part number of the wall mount kit is 700514338.
Before you begin
Obtain the following items:
• Wall mount kit, containing a wall mount bracket.
• Two #8 screws. The screws are not provided with the wall mounting kit.
Procedure
1. Remove the phone from the wall mount.
April 2020
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
environment
28