SERVICE MANUAL
8.7
Lighting system
8.7.1
Replacing front headlight completely (LED lighting unit)
Note
Replacing an individual LED is not possible. If there is a defect, replace the entire front headlight.
Requirements:
· Jaw spanner 7 mm
· Allen key 3 mm
· oblique pliers
· cable binder
Uninstalling head lamps:
·
Switch the electronics OFF on the remote.
·
Remove the rear and the middle covers, as described in chapter 8.1.1 und 8.1.2.
·
Take exact note of the positions of all cables and the sockets that they are connected to. Mark
the connectors and sockets or take a photograph with a digital camera.
·
Disconnect the plug (2) of the appropriate headlight from the lighting circuit board (1).
·
Pull the headlight cable out of the wheelchair. If necessary, also remove the cable ties.
52
®
Invacare
- Kite