Replacing The Complete Head Lamp Assembly (Conventional Lighting System) - Invacare FDX Service Manual

8.5.3

Replacing the complete head lamp assembly (conventional lighting system)

Requirements:
● Phillips screwdriver size 2
● Side cutting pliers
● Cable ties
Uninstalling head lamps:
●
Remove the rear cover, as described in chapter 8.1.2.
●
Take exact note of the positions of all cables and the sockets (1) that they are connected to.
Mark the connectors and sockets or take a photograph with a digital camera.
●
Disconnect the cable of the affected head lamp from the lighting circuit board.
●
Remove all cable ties and pull the cable out of the wheelchair.
58