Replacing The Curb Climber - Invacare Storm Service Manual

8.20.3 Replacing the curb climber

Requirements:
•
5 mm Allen key
•
13 mm socket spanner
•
•
Dismantle the legrests.
•
Insert the curb climber (3) in the mounting (5).
•
Fit the two Allen screws (1) with two washers.
• Fit two nuts (2) with washers from the other side.
•
Tighten the Allen screws and nuts using a 5 mm Allen key and a 13 mm socket spanner.
•
If necessary, fit the positioning shoe (4) to the curb climber as described in chapter Fehler!
Verweisquelle konnte nicht gefunden werden..
• Refit the legrests.
124