Fitting The Headrest To The Easyadapt Back - Invacare Storm Service Manual

8.13.2 Fitting the headrest to the EasyAdapt back

Requirements:
• 4 mm Allen key
• T30 torx wrench
• 10 mm socket spanner
•
• Loosen the three Allen screws (1) using a 4 mm Allen key, but do not remove the screws
completely.
• Move the back plate (2) outwards.
•
Repeat this on the second back plate.
•
•
Insert the torx screws from the front through boreholes made in the top of the backrest.
102