Setting Up The Printer On A Network (Windows Nt 3.5 And 3.51); Tcp/Ip Connection - Tektronix Phaser 360 Service Manual

2
Installing the Printer and Drivers

Setting up the printer on a network (Windows NT 3.5 and 3.51)

2-34 Phaser 360 Color Printer

TCP/IP connection

Note
Windows NT 3.5 and 3.51 include network software called Services
for Macintosh (AppleTalk) and TCP/IP print services (for TCP/IP;
lpr print services). Refer to the Windows NT manual for instructions
on installing this network software. After this software is loaded,
follow these steps:
1.
Select Create a new printer in the Print Manager; select the
appropriate printer driver.
2. Select Other in the Print to field of the From the Printer Properties
dialog box.
3. Select LPR Port for Available Print Monitors; click OK.
4.
For Name or address of host providing lpd, type the printer's IP
address (or Host name if known to the network).
Note The printer's IP address may be available on the printer's
Configuration Page. If not, ask the network administrator.
5. For Name of printer on that machine, type in one of the following
(use capital letters):
PS for PostScript
AUTO for automatic selection
6. Click OK to complete the installation.