Figure 8-3 Removing The Ink Loader - Tektronix Phaser 360 Service Manual

Caution Do not stand the ink loader on end so it heating elements face up.
In this position a residual amount of liquid ink may flow down the
felt-lined ink stick chutes and damage the felt.
Ink loader

Figure 8-3 Removing the ink loader

Note When the ink loader is in place in the printer without the top cover, it
may rest in a lower position and consequentially interfere with the
horizontal movement of the printhead. Place the ink loader on the
upper extrusions in the side frames to keep it elevated above the
printhead. Reinstall one of the rear top cover screws in the ink loader
to secure it in this position.
Field Replaceable Unit Disassembly/Assembly
Disconnect
wiring harnesses
Service Manual
8
9923-36
8-7