Selecting Tests - Tektronix Phaser 360 Service Manual

In the very bottom-right-most corner is a tiny field which indicates the
status of the communication link between the PC and the printer's
processor. It says "OK" when the link is working and "NO" when
communication is lost.

Selecting tests

Press Alt-T (Option T — Mac) to activate the test selection window.
Use the following keys to navigate the lists of tests. The left column, Test Suites,
lists the groups of test. The center column is the individual tests within a
selected test suite. The right-most column "Status" indicates if a test is selected.
You can select a single test, a series of tests, or all the tests is a test group.
In the Test Suites column:
Up/Down arrows – move the Test Suite selection highlight up or
down on the screen. At the top and bottom of the screen, it causes the
list to scroll if there are more tests in that direction on the list.
Tab – Activates a suite of tests. The individual tests of the selected test
suite are displayed in the Individual test column. The test are
preceded with a letter of the alphabet; you can select a test by pressing
the Option key and the letter preceding the test.
PgUp/PgDn – move the display of tests one screen-full at a time. The
highlight generally stays in place on the screen, so this also changes
the highlighted test.
In the Individual Test column:
Up/Down arrows – move the Individual Test selection highlight up or
down on the screen. At the top and bottom of the screen, it causes the
list to scroll if there are more tests in that direction on the list.
Space bar – toggles the Status of the currently highlighted test: to
"Selected" if the test is unselected and to unselected if it is already
selected.
Alt-S (Control S — Mac) – toggles the Status of all tests in the Suite
which contains the currently highlighted test: all to Selected if the
currently highlighted test is not selected and all to unselected if it is
anything else. The status of the other tests in the suite are immaterial.
Alt-A (Control A — Mac) – toggles the Status of ALL tests. Like Alt-S,
the new setting for all tests is based on the currently highlighted test,
regardless of the individual settings of the other tests.
Alt-R (Control R — Mac) – select the currently highlighted test opens
the Run window to prepare to execute the currently selected tests.
Troubleshooting
Service Manual 6-33
6