When properly inserted, a tab on each end of the connector slips into a
hole on each end of the RAM SIMM. Also, a pawl on each end of the
connector latches around each end of the RAM SIMM to lock it in
place.
RAM SIMM
a
Figure 8-36 Installing the RAM SIMM on the main board
6.
Reinstall the main board into the printer.
7.
Reconnect the host interface cables. Turn on the printer and print the
start page to verify the memory installation.
Field Replaceable Unit Disassembly/Assembly
b
Main board
DRAM 0
DRAM1
9923-64
Service Manual
8
8-59