Figure 8-2 Removing The Printer Panels And Covers - Tektronix Phaser 360 Service Manual

Vacuum this area
before removing
Stripper
cover
Left
side panel
Front panel
Front cover

Figure 8-2 Removing the printer panels and covers

8. Stripper cover: Gently lift on each end of the stripper cover to unclip it
from the exit roller.
Ink load door
Note
When the ink loader is in the printer without resting on the top cover,
it may rest in a lower position and consequentially interfere with the
horizontal movement of the printhead. Place the ink loader on the
upper extrusions in the side frames to keep it elevated above the
printhead.
Field Replaceable Unit Disassembly/Assembly
Unclip arms
Top panel
Position
spring cross-
arm to rear of
ink loader
Rear panel
Right
side panel
Service Manual
8
9923-35
8-5