Configuring Novell Netware 4.X Server For The Printer; Nds Method; Bindery Method - Tektronix Phaser 360 Service Manual

Configuring Novell Netware 4.x server for the printer

NDS method

1.
Log in to the network as ADMIN and open the NWAdmin utility.
2. Create a queue object and add the correct queue users.
3. Create a printer object, and add the queue just created to the list of
queues through the Assignments option.
4.
Create a print server object; the print server name must match the
print server name of the printer being used (note the name on the
configuration page). Add the printer to the list of printers through the
Assignments option.

Bindery method

1. Load the utility Advanced Configuration Tool (ACT) onto the file
server through a workstation.
2.
Log on to a file server as supervisor with supervisor privileges.
3. Run ACT and select Quick Configuration.
4. Enter the print server name (TEKxxxxxx) of the printer as it is shown
on the printer's configuration page. (Refer to the topic "Printing the
configuration page" on page 9-5 for details on printing the
configuration page. Select the printer.
5. Select a file server for the printer to service.
6. Select a queue for the printer to service or create a new queue.
7.
Save the configuration.
8. Following this, you can select another file server and create more
queues for the printer to service. You can have a total of 32 queues on
up to eight file servers.
9. After all file servers have been configured, save the configuration file
and restart the print server. Then restart the printer.
Installing the Printer and Drivers
Service Manual
2
2-41