Figure 9-7 Aligning (Timing) The Cap/Wipe/Purge Assembly Drive Belts - Tektronix Phaser 360 Service Manual

9
Checks and Adjustments
9-12 Phaser 360 Color Printer
To adjust gap, loosen
left side tension spring
and feed belt over the
left-side drive shaft gear.
Left-side
drive shaft gear
Slots in the
chassis frame

Figure 9-7 Aligning (timing) the cap/wipe/purge assembly drive belts

Left-side tension spring
Check for equal gaps
here. No more than
0.045 inch.
Gap
Right-side tension spring
Cap/wipe/purge
assembly drive motor
9923-80