Vacuum; Drum Temperature Sensor; Cleaning Page - Tektronix Phaser 360 Service Manual

Cleaning Page

Under certain conditions, the printer purges its ink-jet nozzles to clear any jets
plugged with ink. When the purge is completed, the printer outputs a cleaning
page to clear the purge pattern from the print drum. Ink jets are purged under
the following conditions:
During warm-up from a power-off condition.
When the printer exits the Energy Star mode.
When customers initiate the Clean:Light Stripes automatic
cleaning procedure from the front panel.

Vacuum

Vacuum dust from the top cover, metal dust cover and plastic dust cover under
the stripper fingers.

Drum temperature sensor

With a dry swap, clean any buildup around the drum temperature sensor. You
can access the sensor through the opened stripper finger cover. Also make sure
the sensor rides evenly on the drum surface.
Cleaning and Maintenance
Service Manual
7
7-3