Installing Printer Software For Windows 3.1 - Tektronix Phaser 360 Service Manual

2
Installing the Printer and Drivers

Installing printer software for Windows 3.1

2-32 Phaser 360 Color Printer
1.
Insert either the printer's CD-ROM or the Windows Disk 1 into the
appropriate drive on the computer.
2. Select Run from the File menu.
3. Type in the drive for the CD-ROM or diskette, type SETUP.EXE, and
click OK.
4.
Click Next in the two introduction screens in the Installer.
5. In the Select Installation Type dialog box, select either Easy
Installation or Custom Installation, and click Next.
Easy Installation
The following files are copied to the hard disk:
Tektronix Printer Driver
QuarkXPress PDF (installs an application-specific printer description file)
Samplers (installs color sampler charts and a fonts sampler)
Custom Installation
1. In the Driver Installation dialog box, select from the following options:
Drivers/PPDs (installs driver files and printer description files)
QuarkXPress PDF (installs an application-specific printer description file)
2. Click Next.
3. If you selected Drivers/PPDs in the previous window, the Custom Install: Select
Drivers dialog box appears. Select one of the following drivers and click Next:
Adobe Printer Driver for Windows 3.1
Tektronix Printer Driver for Windows 3.1
Note: The Tektronix Printer Driver for Windows 3.1 must be installed in the Windows
directory (default Destination Directory). Do not change the Destination Directory when
installing the Tektronix driver unless you are installing the driver on a network and you
know the location of the Windows directory on the network drive.
4. In the Custom Install: Select Utilities dialog box, select from the following options:
Printer Utilities (installs utility files for selecting printer features)
Network Utilities (installs utility files for using the printer on a network)
Samplers (installs color sampler charts and a fonts sampler)
Use the default Destination Directory or click Browse.
5. Click Next. The files are copied to the hard disk.
6.
Select the printer type and click Next:
7. The Finish Installation dialog box contains instructions for
completing the printer software setup; click Next.
8.
In the Installation Completed dialog box, click Finish.