Specifications; Table 1-3 Physical Dimensions; Table 1-4 Printer Clearances - Tektronix Phaser 360 Service Manual

Specifications
These specifications apply to the printer.

Table 1-3 Physical dimensions

Dimensions
Height:
Width:
Depth:
Weight:

Table 1-4 Printer clearances

Clearances
Top:
Left:
Right:
Front:
Rear:
Bottom:
Mounting surface
flatness:
Value
33 cm. (13 ins.)
45.7 cm (18 ins.) with Lower Paper Tray Assembly
40 cm (15.7 ins.)
50.2 cm (19.7 ins.)
Approximately 32 kgs (70 lbs). Print engine weight only; add
7 kgs (15.5 lbs.) for optional Lower Paper Tray Assembly.
Value
45.7 cm (18 ins.)
10.2 cm (4 ins.)
10.2 cm (4 ins.)
Unrestricted to replace trays and clear paper jams
10.2 cm (4 ins.)
No obstruction under printer that could block its cooling
vents.
Within 3 degrees of horizontal with all four feet in contact with
the surface. The printer should not be tilted more than 15
from horizontal for more than 1 minute while the printer is
idle or the ink is hot (in liquid state) or if the maintenance tray
is installed.
General Information
o
Service Manual 1-17
1