Fans; Rear Fan; Figure 8-4 Removing The Rear Fan - Tektronix Phaser 360 Service Manual

8
Field Replaceable Unit Disassembly/Assembly

Fans

Rear fan

8-8 Phaser 360 Color Printer
Tools required
Magnetic screwdriver
T-20 TORX tip
T-15 TORX tip
1. Turn off the printer and remove the power cord.
2. Remove the top, left-side and right-side covers as explained in the
earlier topic, "Cabinet panels and covers" on page 8-4.
3.
Remove the ink loader as detailed earlier in the topic, "Ink loader" on
page 8-6.
4. Disconnect the wiring harnesses leading to the rear fan.
5.
Remove the 11 screws securing the rear plate to the engine frame.
6. Remove the four screws securing the rear fan to the rear plate.
Remove the fan.
Rear cover

Figure 8-4 Removing the rear fan

Wiring harness
Rear fan
9923-91