The Diagnostic Pull-Down Menus Summary; Test Command (Alt-T); View Menu; Run Command - Tektronix Phaser 360 Service Manual

The diagnostic pull-down menus summary

All of the functionality in the user interface is accessible from the menu bar.
Some of the functions are additionally available via "accelerator" key (Alt- key)
synonyms. The following discusses the pull-down menu left to right.

Test Command (Alt-T)

Opens the test selection window.

View Menu

Provides for changing various screens and major modes of operation for the
program.
"Tests" – switch to the 68K window to show results of test running on
the print engine.
"Erase Screen" – erases all the characters from the currently selected
window; it has no affect on the test running.
"Debug" Check List Item – enables or disables a trace of all I/O
between the user interface and the printer; it is off by default.
"Test Stats" – lists the status of the last test sequence to run

Run Command

Executes a test sequence.

Next Command

Stops the currently running test and immediately starts the next test.

Stop Command

Stops the currently running test and stops the sequence in progress.
Troubleshooting
Service Manual 6-41
6