Downloading Files If Your Printer Is Connected Through Phaserport; Downloading Files If Your Printer Is Connected To Windows Nt - Tektronix Phaser 850 User Manual

Downloading files if your printer is connected through PhaserPort

This procedure lets you create the printer and then redirect the port, turning client #1 into
a print server.
1.
On Client #1, create a printer using the LPT1 port.
2.
Share the printer to the network.
3.
Install Phaserport and switch the LPT1 port to the Phaserport port.
4.
On client #2, browse the network and install the shared printer.
5.
Open the printer's Properties.
a.
Click Start, select Settings, and then select Printers.
b.
Right-mouse-click on the printer's icon.
c.
In the pop-up dialog box, select Properties.
d.
In the Details tab, click Capture Port and enter the path.

Downloading files if your printer is connected to Windows NT

This procedure lets you redirect (capture) LPT Ports
Under Windows NT print spooler, you create Ports based on their physical location:
Local ports = Lpt1 / Lpt2, etc.
I
IPX Port = \\NW_SERVER\Phaser
I
Appletalk Ports = WV Net 36:Phaser
I
TCP/IP Ports = 162.36.62.151:PS or [AUTO]
I
However, if you're at a command prompt (DOS Prompt) and want to print, or copy, a
PostScript file to a port that is a network port, you can do the following:
I
TCP/IP Ports:
lpr -S [printers IP Address] -P [print queue] filename
For xxample: lpr -S 134.62.36.70 -P PS test.ps
I IPX and Appletalk ports require the redefinition of the LPTX port to the network path
through the use of the NET USE command.
NET USE LPT1 \\Server_Name\Queue_Name
For example: NET USE LPT1 \\NW_SERVER\Phaser
or: NET USE LPT2 \\NT_SERVER_NT\Phaser
After redirecting the port using the NET USE command you can use the COPY
command to print the postscript file.
eg. C:\> COPY TEST.PS LPT1:
When finished, end the redirect with the command:
NET USE LPT1 /delete
Advanced Features and Troubleshooting Manual
Printer Utilities
99