Only AC voltage heater wiring harnesses
should be routed thru this restraint
Figure C-4 Wire dressing below the x-axis drive
Route AC wiring harnesses behind bracket
Tie wraps on the vacuum hose should be trimmed closely and the tie-wrap's "knot" should be oriented
downward so it does not rub against the printer cabinet panel. Do not pinch the vacuum hose shut.
Figure C-5 Wire dressing the vacuum hose and drum fan
C
Wiring Diagrams
Bundle excess ink loader wiring
in restraint
Loop air valve solenoid wiring
harness around restraint
Bundle cap/wipe/purge heater
wiring harness with vacuum hose.
Orient knots of ties downward
Phaser 340 Service Manual
C-3